An Investigation of Welding Brittle Fracture of Titanium Spherical Tank Fabricated by TIG
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 140
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCWI22_074
تاریخ نمایه سازی: 16 فروردین 1401
چکیده مقاله:
In this study, the cause of brittle fracture at the main weld line of a spherical pressure vessel made of Ti-۶Al-۴V alloy has been investigated. To fabrication of pressure vessel, two hemispheres of Ti-۶Al-۴V alloys welded together by gas tungsten arc welding. Due to sensitivity of titanium welding to oxygen, nitrogen, hydrogen, and carbon elements, and solving of the elements as interstitial, the fusion zone, solid zone which hot till ۵۰۰°C, must be protected with high purity argon gas from these elements. Insufficient protection and higher heat input, resulted in formed brittle compounds in the fusion zone.In further studies, the cause of the failure of the welding region has been determined that the outer layer of the fusion zone is oxidized due to inadequate protection. At high pressures inside the vessel, this oxide layer is cracked due to its brittleness and then the crack is grown at αcase with high speed and entered into a welded area.
کلیدواژه ها:
نویسندگان
Y Vahidshad
Assistance Professor, Space Transportation Research Institute, Iranian Space Research Center,
A. H. Khodabakhshi
Researcher, Space Transportation Research Institute, Iranian Space Research Center
A.S Soleymani
Researcher, Space Transportation Research Institute, Iranian Space Research Center,