An Intelligent Computer Interface Utilizing Parallel Picocontrollers (TECHNICAL NOTE)
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 15، شماره: 9
سال انتشار: 1381
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 134
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-15-9_005
تاریخ نمایه سازی: 19 اسفند 1400
چکیده مقاله:
The design of an interface unit is described, in which RS۲۳۲ serial data is converted to latched parallel data on ۲۲ independent lines. The data direction of each line is programmable through the serial port. Two picocontrollers are employed in a parallel processing mode to give the required number of I/O pins, and data on the shared serial line is coded to separate data streams to the individual picocontrollers, and to avoid contention. The hardware configuration and the software for both the computer and microcontroller are described. The speed penalty of such a system compared with direct bus connection is analyzed.
کلیدواژه ها:
نویسندگان
Michael Collier
Electerical Engineering, National University of Science & Technology