Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds

  • سال انتشار: 1401
  • محل انتشار: ماهنامه بین المللی مهندسی، دوره: 35، شماره: 5
  • کد COI اختصاصی: JR_IJE-35-5_002
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 356
دانلود فایل این مقاله

نویسندگان

H. Bahmani

Department of Civil Engineering, Yazd University, Yazd, Iran

H. Khani Sanij

Department of Civil Engineering, Yazd University, Yazd, Iran

R. Roshani

Department of Civil Engineering, Yazd University, Yazd, Iran

M. M. Majidi Shad

Department of Civil Engineering, Yazd University, Yazd, Iran

S. H. Hosseini

Department of Chemical Engineering, Ilam University, Ilam, Iran

M. Edalati

Department of Civil Engineering, Ilam University, Ilam, Iran

M. Olazar

Department of Chemical Engineering, University of the Basque Country UPV/EHU, Bilbao, Spain

S. A. Almasi

Department of Transportation Planning, Imam Khomeini International University, Qazvin, Iran

چکیده

Modification of bitumen allows an improving the properties of bitumen, which can be a useful technique to enhance asphalt’s characteristics. Therefore, this research intended to study the effect of mixing time of different percentages of epoxy resin, between ۰ to ۸%, doped into bitumens on the moisture sensitivity of asphalt compounds containing two types of aggregates, i.e. limestone and siliceous. For this aim, the Sessile Drop Method (SDM) was employed, and moisture resistant parameters associated to surface free energy concept such as surface free energy components, work of cohesion, work of adhesion, work of debonding, adhesion bitumen to aggregate, and wetting bitumen around aggregate surface were assessed. The results revealed that the effect of the mixing time of bitumen and epoxy resin on moisture resistance properties of asphalt compounds significantly depends on the percentage of epoxy resin used in bitumen mixture. For bitumens with ۴ and ۶% epoxy resin, adhesion and wetting parameters had a similar performance for both mixing times of ۱۰ and ۶۰ minutes.  However, asphalt compounds containing ۲ and ۸% epoxy resin modified bitumens prepared for ۱۰ min mixing time had a better adhesion and wetting performance than those prepared for the longer mixing time, ۶۰ minutes.  The effect of mixing time of bitumen modified with epoxy resin on the bitumen and asphalt compound’ performance depend on the percent of additive in the bitumen.

کلیدواژه ها

Bitumen, Epoxy resin, Mixing time, Moisture Sensitivity, Surface Free Energy

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.