Investigation of the effect of external load on a reinforced slope using a combination of piles and anchorage in a case study in Kerman

سال انتشار: 1400
محل انتشار: هفتمین کنگره سالانه بین المللی عمران، معماری و توسعه شهری
کد COI اختصاصی: ICSAU07_0308
زبان مقاله: انگلیسی
تعداد مشاهده: 147

نویسندگان

Master of engineering from Shahid Bahonar University of Kerman,

Assistant Proffesor from Shahid Bahonar University of Kerman,

چکیده

In recent years, with the increase of excavations in urban areas such as public transportation systems (subways, underpasses, etc.), the construction of huge structures and parking lots, the impact of external load on trenches and the issue of maintaining their stability is of particular importance. One of the most important issues in the stability of trenches is choosing the appropriate method technically, operationally and economically. One of the proposed solutions for such problems is the slope stabilization method using a combination of piles and anchorage. In this method, first the in-situ piles are executed in the drilled holes and then the excavation and anchoring are performed step by step. Therefore, using geotechnical information of Kerman city and using FLAC۳D finite difference software, stabilization system was performed using a combination of piles and anchorage on the studied slope. The results of this study showed that in Kerman soil, vertical trenches without support system with a distributed load of ۰.۵۰ MPa, have a safety factor of ۰.۶۳ and for vertical trenches without support system with a local load of ۰.۵۰ MPa will have a safety factor of ۰.۶۲. Also for vertical trenches with combined pile and anchorage support system including ۱۸ anchors with ۱۰ ° installation angle, ۴ piles and ۱۰ cm shotcrete and ۰.۵۰ MPa distributed load, have a safety factor of ۱.۳۹ and for vertical trenches with the above mentioned support system and With a local applied load of ۰.۵۰ MPa, they will have a safety factor of ۱.۳۸. The results show that the mentioned support system can perform well in urban areas to prevent the displacment of trenches and large ditches.

کلیدواژه ها

FLAC۳D, Slope stability, External load, Pile, Anchorage

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.