Scale-Adaptive Simulation of Flow around a Circular Cylinder near a Plane Boundary
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 126
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-11-6_003
تاریخ نمایه سازی: 18 دی 1400
چکیده مقاله:
Numerical investigations using Scale-Adaptive Simulation (SAS) turbulence model are carried out to study the flow around a circular cylinder near to a plane boundary at Reynolds numbers between ۸.۶x۱۰۴ and ۲.۷۷x۱۰۵ with two different boundary layer thickness (δ) on the plane. The effects of gap (G) between the cylinder and the plane, the Reynolds number and the thickness of the plane boundary layer are analyzed through the drag and the lift coefficients, the Strouhal number, as well as through the wake flow structures behind the cylinder. Two and three-dimensional simulations are performed to examine the significance of the flow three-dimensionality when the cylinder is located near a plane. The SAS model results are compared with published experimental data and numerical results for similar flow conditions. The characteristics of the wake structures and force acting on the cylinder are in good agreement with previous studies. In general, the ۳D-SAS model performed better than ۲D-SAS. Based on the numerical results here obtained, the SAS turbulence model can be applied to study this flow configuration.
کلیدواژه ها:
نویسندگان
M. Grioni
National Scientific and Technical Research Council, CONICET, Argentina
S. A. Elaskar
National Scientific and Technical Research Council, CONICET, Argentina
A. E. Mirasso
Institute of Structural Mechanics and Seismic Risk, National University of Cuyo, Mendoza, ۵۵۰۰, Argentina