A Detailed Study of Boost Pressure and Injection Timing on an RCCI Engine Map Fueled with Iso-Octane and N-Heptane Fuels

  • سال انتشار: 1398
  • محل انتشار: دوماهنامه مکانیک سیالات کاربردی، دوره: 12، شماره: 4
  • کد COI اختصاصی: JR_JAFM-12-4_015
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 182
دانلود فایل این مقاله

نویسندگان

H. R. Fajri

Department of Mechanical Engineering, K. N. Toosi University of Technology, ۴۷۰ Mirdamad Ave. West, ۱۹۶۹۷, Tehran, Iran

A. H. Shamekhi

Department of Mechanical Engineering, K. N. Toosi University of Technology, ۴۷۰ Mirdamad Ave. West, ۱۹۶۹۷, Tehran, Iran

S. Rezaie

Department of Mechanical Engineering, Semnan University, ۱۹۱۱۱-۳۵۱۳۱, Semnan, Iran

M. J. Jafari

Department of Mechanical Engineering, K. N. Toosi University of Technology, ۴۷۰ Mirdamad Ave. West, ۱۹۶۹۷, Tehran, Iran

S. A. Jazayeri

Department of Mechanical Engineering, K. N. Toosi University of Technology, ۴۷۰ Mirdamad Ave. West, ۱۹۶۹۷, Tehran, Iran

چکیده

By using two types of different fuels and changing the ratios of these fuels, Reactivity Controlled Compression Ignition Engine (RCCI) is able to provide a more effective control over combustion phase at different loads and speeds. In a typical RCCI engine which could be considered as a type of homogeneous charge compression ignition (HCCI) engine, a low reactive fuel is injected into the intake port and a high reactive fuel is directly injected into the combustion chamber. In this study, a multi-dimensional model coupled with chemical mechanism is developed to simulate an RCCI engine operation fueled with iso-octane as the low reactive fuel and n-heptane as the high reactive one. Initially, the engine map was derived using different quantities of total above-mentioned fuels at different ratios and then engine inappropriate operating points were detected and improved by changing intake air pressure and injection timing strategies. The improved criteria to extend engine map are ringing intensity limit, NOx formation standard and gross indicated efficiency. It was concluded that high ringing intensity and NOx formation can be reduced by increasing intake air pressure; also badfire and misfire points can get improved by retarding the injection timing.

کلیدواژه ها

RCCI engine, Iso, octane, N, heptane, Injection timing, Intake air pressure

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.