Influence of the Spray Scrubber Geometry on the Efficiency of Dust Removal – Theoretical Predictions and CFD Analysis
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 122
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-13-4_001
تاریخ نمایه سازی: 15 دی 1400
چکیده مقاله:
The article presents a method of purification of synthesis gas (syngas) produced as a result of biomass gasification with the use of a spray scrubber. The authors focus on the presentation of how individual elements of the geometry of a spray scrubber can influence its particle removal efficiency. The paper examines cases of dry particle removal, the use of demisters in purification process and wet scrubber collection efficiency with the use of numerical fluid mechanics (CFD). General equations are also used by authors to determine the initial predictions. The key part of the article is to present the results of the velocity and pressure distribution depending on the scrubber construction, determine the effect of the number of demisters used on the particle removal efficiency and to determine the probability of coalescence depending on the size of liquid droplets. Moreover, the authors formulate a simplified formula for the collection efficiency of a scrubber which is consistent with the results obtained from CFD calculations. The numerical results of collection efficiency were compared with experimental data from literature.
کلیدواژه ها:
نویسندگان
A. Tomaszewski
Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdansk, ۸۰-۲۳۱, Poland
T. Przybylinski
Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdansk, ۸۰-۲۳۱, Poland
P. Kapica
Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdansk, ۸۰-۲۳۱, Poland
M. Lackowski
Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdansk, ۸۰-۲۳۱, Poland