Effect of clearance height on aerodynamic losses for flat and squealer tip geometries of gas turbine blade
- سال انتشار: 1389
- محل انتشار: دهمین همایش انجمن هوافضای ایران
- کد COI اختصاصی: AEROSPACE10_132
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1272
نویسندگان
M.s student of Mechanical Engineering
۲Professor of Mechanical Engineering
چکیده
A thorough 3d numerical study is performed to predict the flow field around a gas turbine rotor blade in cascade circumstances. Calculations are carried out for both flat and squealer blade tip geometries by means of solving Reynolds-averaged Navier-Stokes equations in conjunction with the k-ω two-equation turbulence model. For each geometry, three different tip gap-blade span ratios of 1%, 1.5% and 2.5% in contrast with 0% clearance are examined. By comparing the results, behavior of flow vortices and consequent loss coefficients at the downstream of the blade, around the gap region area have been elucidated. The squealer cases noticeably decreased the leakage ratio compared to the flat ones, however was not effective as much in reduction of the exit total loss particularly in small gap heights.کلیدواژه ها
tip clearance-squealer tip geometry -lossleakage ratioمقالات مرتبط جدید
- اثر ضریب اسکمپتون بر روی تنش فن میزس استوانه ی جدار ضخیم متخلخل اشباع تحت فشار داخلی با استفاده از تئوری تغییرشکل برشی مرتبه ی اول
- محاسبه تجربی نیروهای وارده از دست خلبان به استیک هواپیمای سبک در طول پرواز
- استخراج بار آزمایشگاهی جهت اجرای آزمون استاتیکی سکان عمودی هواپیما
- پایداری در لجستیک حمل و نقل هوایی بار: درس هایی از همه گیری جهانی
- بررسی جوانب و ابعاد توسعه فناوری های نوین بر زیست بوم فضایی با تاکید بر حقوق بین الملل فضایی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.