The Role of Organoclay on In-situ Microfibril Formation of Epoxy in Poly(butylene terephtalate) Nanocomposites

سال انتشار: 1390
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
کد COI اختصاصی: PPSRC2011_325
زبان مقاله: انگلیسی
تعداد مشاهده: 1198

نویسندگان

No. ۴۲۴, Hafez Ave., P.O. Box: ۱۵۸۷۵-۴۴۱۳ Department of Polymer Engineering and Color Technology, Amirkabir University of Technology Tehran, Iran

H Nazockdast

G.R Pircheraghi

چکیده

The main objective of the present work was to study the role of organoclay (Cloisite® 30B) on the microfibrillation process of epoxy phase in Poly(butylene terephtalate), PBT, matrix both in presence and absence of epoxy curing agent. The PBT/epoxy blend samples with constant blend ratio (60/40) were prepared by melt mixing in a twin screw extruder. The elongational flow imposed by drawing the extrudate at the die exit permitted controlledgeneration of febrile morphology of the dispersed epoxy phase, with a fiber diameter of 0.8 μm and an aspect ratio greater than 100. It was shown that when the curing agent was addedinto the extruder, its reactivity with epoxy at high temperature was high enough and selectively affected on the epoxy phase. The SEM results showed smaller epoxy droplet sizefor samples containing nanoclay compared to simple blends. This could be explained in terms of hindrance effect of nanoclay in reducing the coalescence as a dominating parameter due to presence of nanoclay in both phases. These results were supported by the melt linear viscoelastic results which showed enhanced low frequency viscosity and storage modulus forthese samples. Addition of nanoclay was found to have little effect on extent of fibrillation epoxy droplet in stretched samples. The rheological results obtained for stretched samplesshowed very strong increase in low frequency solid body response whose extent was increase with increasing draw ratio. This mainly attributed to special 3-D network formed between microfibrils whose shape was stabilized by either presence of nanoclay or accelerated curing process of fibrillated epoxy. From SEM micrographs and linear viscoelastic measurements it can be deduced that curing process has small changes on the extent of fibrillation epoxy droplet in stretched samples. But it leads to improvement of interfacial interaction between two phases in the nanocomposites.

کلیدواژه ها

Microfibril, Epoxy, In-situ, Nanocomposite

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.