Exprimental and simulation Study on the Effect of Process Parameters on the Warpage of thin-shell Injection Molded Parts

  • سال انتشار: 1390
  • محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
  • کد COI اختصاصی: PPSRC2011_298
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1350
دانلود فایل این مقاله

نویسندگان

Saeed Mobin

MSc Student, Manufacturing Departement, Graduated School Faculty, Islamic Azad University, Dezful Branch, Dezful,

Abdolmohammad Rezavand

Assistant Professor, Manufacturing Departement, Graduated School Faculty, Islamic Azad University, Dezful Branch, Dezful,Iran

Taher Azdast

Assistant Professor, Mechanical Engineering Department ,Urmia University

چکیده

This paper aim to determine the injection molding conditions to minimize the warpage of an injection molded Part with the thin-shell feature. A set-square, 14 cm with the thickness of 2 mm is considered as a thin-shell plastic part. Used thermoplastic, Poly Carbonate Bayer 2407 GE was dried for 4 hours in 120 ºC before Injection Processing. To achieve the minimum warpage, optimum process condition parameters are determined, melt temperature, packing pressure, packing time, cooling time and injection speed are considered as process parameters. Applying the taguchi method as an effective method to deduce the optimum set of effective factors in injection molding to produce parts with minimum warpage. The injection process were also simulated using the moldflow software . The results showed that melt temperature had the greatest influence on the warpage, followed by packing Time, packing pressure and cooling time. However, warpage was only slightly influenced by the injection speed. the proposed optimization can effectively decrease the warpage of injection molded part.

کلیدواژه ها

Injection Molding, Warpage, Taguchi, Experimental and Simulation Study

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.