Experimental Study on theEffect of Melt Flow Index on Properties of Virgin and Reprocessed Wood-HDPE Composites

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,433

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_040

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

Wood-Plastic Composites consist of wood particles and a thermoplastic matrix such as PE, PP and PVC. Among the thermoplastics,high density polyethylene (HDPE) is more favorable since the processing temperature can be maintained low enough to avoid wood burning. Various grades of HDPE with different melt flow indexes (MFI) are available by the suppliers to be used in WPC composition which may result differences in final product properties.The aim of this study was to understand the role of matrix MFI on the recycle ability of WPCs produced via the extrusion process. Three grades of HDPE with low, middle and high MFI, respectively named as LMFI, MMFI and HMFI (0.45, 7 and 20 gr/10min), were used as the polymeric matrixto produce rod shaped profiles of WPC with 60 %wt. wood content. For reprocessing, produced WPC profiles were ground andwood-plastic granules obtained. Mechanical properties were obtained from tensile test. In addition, water uptake measurements were also carried out. The results show thatreprocessed WPCs with HMFI HDPE showpoorer properties in comparison tothose of non-reprocessed ones. On the other hand, interestingly results showed that reprocessed profiles with LMFI and MMFI HDPE reveal improved properties from mechanical aspects.

نویسندگان

Majid TabkhPaz Sarabi

Department of Mechanical Engineering, Tarbiat Modares University Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • E. Soury, A. H. Behravesh, E. RouhaniEs fahani and A. ...
  • M. D. H. Beg and K. L. Pickering, Composites Part ...
  • A. Ashori, B ioresource Techno logy, 2008, 99, 4661-4667 (2008). ...
  • K. OksmanNiska and M. Sain, Wood-polymer composites, Woodhead Publishing Limited, ...
  • A. Ashori and A Nourbakhsh, Waste Manag, 2009 , 29, ...
  • D. J. Gardner, D. Murdock, Extrusion of Wood Plastic Composites. ...
  • P. W. Balasuriya, L. Ye and Y. W. Mai, Composites ...
  • S. Huang, P. Cortes and W. Cantwell, Journal of Materials ...
  • T. Kealy, Journal of Applied Polymer Science, 2009, 1 12, ...
  • Proceedings of the Polymer Process ing S ociety As ia/Aus ...
  • نمایش کامل مراجع