Fracture behavior and morphology of PMMA-organoclay nanocomposite bone cement

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,126

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_019

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

Whereas application of orthopedic bone cements raise dramatically during the last decade, improving its properties strongly seems necessary. Generally, commercial bone cements are made from brittle polymethyl methacrylate (PMMA). Physical and mechanical properties of PMMA- Montmorillonite (MMT) organoclay (Cloisite 30B) nanocomposites bone cement were considered in this study. MMT organoclay (0.25, 0.5, 1 and 2 wt%) was dispersed on the MMA monomer solution ultrasonically and then was added to the powder components of the bone cement to prepare the samples. X-ray diffraction (XRD) patterns were used to study the dispersion state of nanoclays in PMMA matrix. There was no characteristic peak in XRD patterns in the scan range of 2-10° which can be attributed to the partially intercalation or exfoliation of nanoclays in PMMA. This result was confirmed comparing of transmission electron microscopy (TEM) image. Differential scanning calorimetry (DSC) results illustrated decreasing of glass transition temperature by incorporation of nanoclays to the bone cement. Considering thermal gravimetric analysis (TGA) results approved that the higher contents of organoclay increase the thermal stability of nanocomposites. Furthermore tensile results for MMT organoclay nanocomposite bone cement indicated higher Young modulus and tensile strength. Linear elastic fracture mechanics (LEFM) was used in compact-tension (CT) tests and the CT results showed higher fracture toughness (KI) for organoclay incorporated nanocomposite at 0.5 wt% compare to the other samples. Morphological studies were conducted by scanning electron microscopy (SEM). The SEM results of the fractured surfaces confirmed the increasing in porosity of nanocomposite bone cements compared to the neat bone cement.

کلیدواژه ها:

نویسندگان

Saman Mahdavi

Institute of Polymeric Materials, Polymer Engineering Department, Sahand University of Technology, P.O. Box: ۵۱۳۳۵-۱۹۹۶, Tabriz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • J. Hill, J. Orr, N. Duune, Int. J. Nano and ...
  • J. H. Wang, T. H. Young, T and Lin, D. ...
  • Procedings of the Polymer Processing Society Asia/Australi Regional Meeting - ...
  • S. Y. Kwon, S. S. Kim, Macromol, Symp. 2007, pp. ...
  • نمایش کامل مراجع