Three-dimensional finite element analysis of electromagnetic vacuum circuit breaker including a magnetic spring
محل انتشار: بیست و سومین کنفرانس بین المللی برق
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,166
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PSC23_019
تاریخ نمایه سازی: 1 بهمن 1390
چکیده مقاله:
This paper presents a design of a new highspeed electromagnetic repulsion mechanism for a high-voltage vacuum circuit breaker. This mechanism is based on a Coil-CoilElectromagnetic Repulsion driving and a Permanent Magnet Spring. The latter is used instead of the conventional disk spring due to its more suitable force characteristics for the vacuum interrupter. In this work, we have developed an electromagnetic analysis coupled with motion, which considers the relation of the movement between theplurality of the actuators and the contact of the interrupter connected with a mechanical linkage. Comparing the results from 2D Finite Element Method (FEM) with those from 3D FEM, we understand that 2D FEM is not suitable because of ignoring the magnetic flux distribution inside the yoke of electromagnetic actuator
کلیدواژه ها:
Electromagnetic vacuum circuit breaker ، finite element method
نویسندگان
Behrooz Rezaeealam
Lorestan UniversityIRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :