Finite Element Modeling and Vibration Analysis of Tie-Bolted Rotors
- سال انتشار: 1389
- محل انتشار: پنجمین کنفرانس پایش وضعیت و عیب یابی
- کد COI اختصاصی: CMFD05_049
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1699
نویسندگان
۱,۲,۳Mechanical Engineering Department, Sharif University of Technology
Professor
PhD Student
چکیده
Tie-Bolted rotors have different applications in industries. Vibration analysis of this type of rotors would be useful for condition monitoring and fault diagnosis purposes. Tie-Bolted rotors consist of several disks that are tightened by several bolts crossed among them. Modeling of this kind of rotors is different from simple continuous rotors because of their multi-sectional configuration. In this paper, a novel finite element model has been developed for a typical tie-bolted rotor. In this model, the flanges of disks are assumed as a new rotor. In addition, the stiffness effects of webs are neglected and they are considered as inertial elements. The Timoshenko shaft element is used for modeling the tie-rod rotor. Damping matrix ncluding gyroscopic terms and internal damping of the shaft has been neglected. Considering the assembly mechanism of rotor (bolts tensioned and disks pressed), the stiffness matrix is modified in order to take into account the axial force effect. As a result, the finite element model is applied for an industrial shaft. Using Campbell diagram, run up critical speeds and the corresponding mode shapes are extracted for different values of axial force. The results exhibit that the compressive axial force in rotor has decreasing effect on critical speeds. The results are compared with the experimental data available in the literature and good agreement has been achieved.کلیدواژه ها
Tie-Bolted Rotor, Finite Element Modeling, Axial Forceمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.