Applying Genetic Algorithm and Artificial Neural network for Crack Identification in Blades
- سال انتشار: 1389
- محل انتشار: پنجمین کنفرانس پایش وضعیت و عیب یابی
- کد COI اختصاصی: CMFD05_033
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2635
نویسندگان
۱Msc Student, Mechanical engineering department, Bu-Ali Sina University, Hamedan, Iran.
Msc Student, Mechanical engineering department, Islamic Azad University of Takestan, Takestan, Iran
۳Msc Student, Mechanical engineering department, Bu-Ali Sina University, Hamedan, Iran.
Assistance Professor, Mechanical engineering department, Bu-Ali Sina University, Hamedan, Iran.
چکیده
In this paper a method for crack detection in blades is presented. In the suggested method, the process of crack identification is consists of four stages. In first stage, three natural frequencies of a blade for different locations and depths of cracks were calculated using Finite Element Method (FEM). The obtained results were verified with the results of experimental modal analysis. In second stage, two Multi Layer Feed Forward (MLFF) neural networks were created. In third stage, Genetic Algorithm (GA) was used to training the neural network. The inputs of neural networks were the first three natural frequencies and the outputs of first and second neural networks were corresponding locations and depths of cracks, respectively. In forth stage, some of natural frequencies of blade with different crack situations as inputs applied to trained neural networks. Finally obtained results showed that predicted cracks characteristics were in good agreements with actual dataکلیدواژه ها
crack detection, genetic algorithm, finite element method, experimental modal analysis, bladeمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.