Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 6، شماره: 3
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 157
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-6-3_007
تاریخ نمایه سازی: 7 مهر 1400
چکیده مقاله:
In this article, the effect of different yield functions on prediction of forming limit curve (FLC) for aluminum sheet is studied. Due to importance of FLC in sheet metal forming, concentration on effective parameters must be considered exactly in order to have better theoretical prediction comparing experimental results. Yield function is one of the factors which are improved by adding new coefficients that follows the behaviour of material with good approximation, so applying different yield functions can change shape and level of FLCs. In this study the yield criteria which are used in determination of forming limit curves, are Hill۴۸, Hosford, BBC۲۰۰۸, Soare۲۰۰۸, Plunkett۲۰۰۸ and YLD۲۰۱۱. The YLD۲۰۱۱ yield function is more appropriate than the other yield function for prediction of the FLD of aluminum alloy. The well-known Marciniak-Kuczynski (M-K) theory and voce hardening law have also been used. To verify the numerical results, the obtained results have been compared with available experimental data.
کلیدواژه ها:
نویسندگان
Farzaneh Moosavi
school of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Mojdeh Erfanian
School of Mechanical Engineering, Iran University of Science and Technology
Ramin Hashemi
Department of Mechanical Engineering, Iran University of Science & Technology
Reza Madoliat
Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran