A finite element analysis of orthogonal machining of Aluminum ۶۰۶۱using Johnson-Cook plasticity model

سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 141

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

MEMCONF05_061

تاریخ نمایه سازی: 27 مرداد 1400

چکیده مقاله:

This study involves the finite element simulation of orthogonal machining of Aluminum ۶۰۶۱ while embedding Johnson-Cook plasticity model. A ۳D model for metal cutting with continues chip formation using finite element ABAQUS/EXPLICIT general code is presented. The Johnson and Cook damage equation is also used to determine chip separation from the main part. The effect of rake angle on machining forces and stress/strain distribution is investigated. The simulation shows that increasing the rake angle results in decreasing the cutting force. It is also deducted that negative rake angle creates a larger high stress field at the vicinity of the tool cutting edge.

نویسندگان

Mehrdad Ghatrehnaby

Assistant Professor