Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 52، شماره: 2
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 230
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-52-2_010
تاریخ نمایه سازی: 20 مرداد 1400
چکیده مقاله:
The purpose of this paper is to analyze the effects of structural and mechanical characteristics of metal foam on the melting behavior of phase change materials under the influence of different heat fluxes. To this aim, a two dimensional numerical model considering the non-equilibrium thermal factor, non-Darcy effect and local natural convection was used. The governing equations of PCM and metal foam are discretized using a finite volume method with a collocated grid arrangement. To simulate the melting of PCM, the enthalpy-porosity method is applied which computes the liquid fraction at each iteration, based on the enthalpy balance. The effect of metal foam characteristics (porosity, pores size and base material) and wall heat flux on the PCM melting time were investigated. The result showed that for both wall heat fluxes (۴۰۰۰ W m-۲ and ۸۰۰۰ W m-۲), foam structure and its mechanical properties have significant influence on the PCM melting time which these effects should be considered.
کلیدواژه ها:
نویسندگان
Aminreza Noghrehabadi
Professor, Department of Mechanical Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
Amin Samimi Behbahan
PhD candidate, Department of Mechanical Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz,
C.P. Wong
Professor, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia, United States
Morteza Behbahani-Nejad
Professor, Department of Mechanical Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :