Analytical and Numerical Evaluation of Wire Flat Rolling Process Based on the Slab Method and DEFORM-۳D
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 8، شماره: 4
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 275
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-8-4_001
تاریخ نمایه سازی: 9 مرداد 1400
چکیده مقاله:
Considering slab method, a three-dimensional analytical model was adopted to evaluate the rolling pressure, force and torque in symmetrical wire flat rolling. Due to the effectiveness of the shear friction model to express the frictional state in the bulk metal forming, thus, it was used to define in slab formulation. In this paper, the plains strain condition no longer is valid and, the strain on z direction must also be taken into account in calculations. The resultant differential equations were solved numerically by Rung Kutta method and MATLAB software. It was concluded that as shear factor rises in the range of o.۴
کلیدواژه ها:
نویسندگان
Behzad Pasoudeh
PhD Student, Department of Engineering, Mechanical group, Urmia University, Urmia, Iran
Hadi tagimalek
PhD Student, Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :