Effect of using nano-encapsulated phase change material on drag coefficient and temperature in a square cylinder
- سال انتشار: 1400
- محل انتشار: بیست و نهمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران و هشتمین همایش صنعت نیروگاه های حرارتی
- کد COI اختصاصی: ISME29_306
- زبان مقاله: انگلیسی
- تعداد مشاهده: 652
نویسندگان
Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran
M.Sc. student, School of Mechanical Engineering, Iran University of Science and Technology, Tehran
Ph.D. candidate, School of Mechanical Engineering, Iran University of Science and Technology, Tehran
چکیده
In the present paper, a two-dimensional model for investigating thermal and hydrodynamic characteristics of a square cross-section cylinder with nano-encapsulated phase change material (NEPCM) as the coolant is studied. Continuity, momentum and energy equations are solved using finite volume method based on SIMPLE algorithm. Base fluid and NEPCM particles material are pure water and n-octadecane with an average diameter of ۱۰۰ nm and melting range of ۱۰ K, respectively. Coolant flow is steady and laminar, while the square cylinder emits a constant heat flux of ۲۵۰۰ W/m۲ into the fluid around it. Effects of NEPCM particles volume fraction in the range of ۰% to ۲۰% and Reynolds numbers ranging from ۵ to ۴۰ on Nusselt number, drag coefficient and local cylinder temperature are studied. Results show that utilization of NEPCM particles increases Nusselt number and decreases local cylinder temperature. These nanoparticles slightly increase drag coefficient. With enhancing Reynolds number, Nusselt number increases for both base fluid and NEPCM slurry. Additionally, it is found that local temperature of cylinder and drag coefficient are inversely related to Reynolds numberکلیدواژه ها
square cylinder, phase change material, nano-encapsulated PCM, volume fractionمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.