Numerical Investigation on Using of the Guide Vanes in the Air-Cooled Condenser’s Main Steam Manifold
محل انتشار: بیست و نهمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران و هشتمین همایش صنعت نیروگاه های حرارتی
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 155
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME29_075
تاریخ نمایه سازی: 13 تیر 1400
چکیده مقاله:
The power plant cooling system is considered as one of the effective components of the efficiency in thermal power plants. In this study, a numerical analysis is carried out on the existing main steam manifold of an aircooled condenser, with unequal distribution of steam flow rate into seven branches. Thepurpose of this study is to decrease the local pressure drop at the Tee-junctions, in order to modify the flow field and equally distributethe steam flow between all branches. Doing so, a configuration of guide vanes is proposed to be installed in each Tee-junction. Resultsshowed that the new design (with guide vanes) can effectively restrain the flow separation at the entrance of the Tee-junction, lowering the steam pressure drop. By careful design of the geometry of the guide vanes, mass flow rates of the steam leaving each branch are almost equal. One can also takeadvantage of reduced turbulent kinetic energy of the flow which is important in terms of lowering fluid-born vibra
کلیدواژه ها:
نویسندگان
Sepideh Esmaeilirad
Monenco Iran Consultant Engineers, R&D office, Tehran;
Mohammad Namazizadeh
Monenco Iran Consultant Engineers, R&D office, Tehran;
Leila Borghei
Monenco Iran Consultant Engineers, Deputy of Engineering, Tehran;
Ali Nayab Aghaee
Monenco Iran Consultant Engineers, Deputy of Engineering, Tehran;
Gholamreza Ghezalasheghi
Monenco Iran Consultant Engineers, Deputy of Engineering, Tehran;