Prediction of Residual Stresses by Radial Basis Neural Network in HSLA-۶۵ Steel Weldments
سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 363
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-8-2_007
تاریخ نمایه سازی: 18 اردیبهشت 1400
چکیده مقاله:
This paper investigates the residual stress fields in the vicinity of weld bead in HSLA-۶۵ steel weldments using a neural network. This study consists of two cases: (i) the experimental analysis was carried out on the measurement of residual stresses by XRD technique. Many different specimens that were subjected to different conditions were studied. The values and distributions of residual stresses occurring in welding of HSLA-۶۵ plate under various conditions were determined. (ii) The mathematical modeling analysis has proposed the use of radial basis (RB) NN to determine the residual stresses based on the welding conditions. The input of RBNN are welding current, welding voltage, welding heat input, travel speed of welding, wire feed speed and distance from weld. The best fitting training data set was obtained with ۱۸ neurons in the hidden layer, which made it possible to predict residual stresses with accuracy of at least as good as the experimental error, over the whole experimental range. After training, it was found that the regression values (R۲) are ۰.۹۹۹۶۶۴ and ۰.۹۹۹۳۲۲ for newrbe and newrb functions respectively. Similarly, these values for testing data are ۰.۹۹۹۴۲۵ and ۰.۹۹۸۵۰۵, respectively. Based on the verification errors, it was shown that the radial basis function of neural network with newrbe function is superior in this particular case, and has the average error of ۷.۷۰% in predicting the residual stresses in HSLA-۶۵. This method is conceptually straightforward, and it is also applicable to other type of welding for practical purposes.
کلیدواژه ها:
نویسندگان
M. Heidari
Department of Mechanical Engineering, Aligudarz Branch, Islamic Azad University, Aligudarz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :