Effect of friction stir post-processing on microstructural and mechanical properties of AAl۵۰۵۲ GTAW welds
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 302
فایل این مقاله در 23 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCWI21_059
تاریخ نمایه سازی: 19 فروردین 1400
چکیده مقاله:
In this study, the effect of friction stir post-processing on the microstructural characteristics and mechanical properties of GTAW (Gas Tungsten Arc Welding) welds in the aluminum ۵۰۵۲ alloy were evaluated. Friction stir processing destroyed the grains dendritic microstructure and due to dynamic recrystallization resulted in very fine and equiaxed grains structure in the fusion zone. The hardness of the friction stir processed welds significantly improved because of microstructure grain refinement. Besides, the friction stir processed weld demonstrated higher ultimate tensile strength (~۲۷۵ MPa) and superior elongation (۳۱.۱%) as compared to those of the base metal and unprocessed weld
کلیدواژه ها:
نویسندگان
Ghasem Azimi-Roeen
Center of Educational Workshops, Isfahan University of Technology, P.O. Box: ۸۴۱۵۶۸۳۱۱۱, Isfahan,Iran ,
Rahmatollah Emadi
Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶۸۳۱۱۱, Iran
Mohsen Shooshtari
Department of Biosystem Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶۸۳۱۱۱, Iran