Effect of resistance spot welding parameters on microstructure and mechanical properties of 1050 aluminium alloy and ST14 carbon steel joint
- سال انتشار: 1399
- محل انتشار: سومین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب ایران، بیست و یکمین کنفرانس ملی جوش و بازرسی و دهمین کنفرانس ملی آزمایش های غیرمخرب
- کد COI اختصاصی: INCWI21_035
- زبان مقاله: انگلیسی
- تعداد مشاهده: 399
نویسندگان
Phd Student of Metallurgy Engineering, Materials and Energy Research Center, Karaj, Iran
Associate Professor, Department of Materials Engineering, Karaj Islamic Azad University, Karaj, Iran
MSc Student of Materials Engineering, Islamic Azad University, Karaj, Iran
چکیده
In this study, the connection of 1050 aluminum alloy to St14 plain carbon steel was investigated by point resistance welding method. The variable parameters in this processwere the holding time of the jaws and the power of the device. After welding, shear tests, microstructure and microhardness tests were performed. Examination of EDS analysis in the welding zone showed that the compounds formed near the steel layer are mainly ironrich intermetallic compounds and in the part near the aluminum alloy the intermetallic compounds are richer than aluminum. The results of shear test showed that the highest shear strength was related to the connected sample with a power of 2.5 kV and a duration of 7 seconds in the amount of 116.60 MPa and the lowest shear strength was related to the connected sample with a power of 2.5 kV and a duration of 4 The second was 19.80 MPa. The results of the microhardness test showed that the highest amount of microhardness in the welding button was related to the sample connected in 4 seconds and the power of 2.5 kW was 240.57 Vickers and the lowest amount of microhardness was related to the sample. Connected in 5 seconds and a power of 7.5 kW was 165.57 Vickers. Keywords: Point Resistance Welding (RSW), 1050 Aluminum, ST14 Steel.کلیدواژه ها
Resistance Spot Welding, 1050 Alumimium Alloy, St14 Steel.مقالات مرتبط جدید
- Young’s modulus and Poisson’s ratio of enhanced re_entrant
- Vibrations Analysis of star-shaped auxetic plate using the Differential Quadrature Method
- Uterine and ovarian tissue engineering
- Type -I hot corrosion behavior of Cr -modified slurry alumini de coating superalloy Rene ۸۰
- Synthesis and characterization of temperature-sensitive smart hydrogel of polyethylene glycol
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.