A review of methods for preparation of narrow sized polymer beads in suspension polymerization
محل انتشار: دومین همایش ملی تحقیقات نوین در مهندسی شیمی
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,003
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CMRCE02_038
تاریخ نمایه سازی: 22 آذر 1389
چکیده مقاله:
Polymer beads can be produced in various processes among which, the suspension polymerization is remarkable due to the production of beads in micrometer scale. However, incapability of suspension polymerization to produce uniform beads with narrow size distribution is its great limitation. To overcome this problem and due to the high economical demands for polymer products, prepared from uniform beads, a great extent of researches have been focused on narrow sizing of the beads in suspension polymerzation. Using loop reactors, membrane, microchannels, nozzles, and orifice, all have been employed to diperse monomer or polymer solutions in such a way to obtain uniform polymer beads. In this paper, the characteristics of each methods are reviewed.
کلیدواژه ها:
نویسندگان
Yaseen keykha۱,
MSC student of chemical engineering, University of Sistan and Baluchestan
Hossein Zohdi Fasayi۲
MSC student of chemical engineering, University of Sistan and Baluchestan
Farshad Farshchi Tabrizi۳
Assistant professor chemical engineering, University of Sistan and Baluchestan
Abdloreza Samimi۴
Assistant professor chemical engineering, University of Sistan and Baluchestan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :