Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers
- سال انتشار: 1399
- محل انتشار: ماهنامه بین المللی مهندسی، دوره: 33، شماره: 8
- کد COI اختصاصی: JR_IJE-33-8_004
- زبان مقاله: انگلیسی
- تعداد مشاهده: 259
نویسندگان
Department of Civil Engineering, National Institute of Technology Warangal, Telangana, India
Department of Civil Engineering, National Institute of Technology Warangal, Telangana, India
Civil Engineering Department, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad, Telangana State, India
چکیده
Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending single length glass fiber and single length steel fiber with a total volume fraction of 1.65% into the concrete and Hybrid Graded Fiber Reinforced High Strength Concrete (HyGrFR-HSC) mixes were obtained by mixing different lengths of glass fiber with different length of steel fibers at a total volume fraction of 1.65% into the concrete. A comparative study was made between HyFR-HSC and HyGrFR-HSC specimens to investigate the effect of fiber grading on strength properties and the uniaxial compressive behaviour of HSC with hybrid fibers. In both HyFRC and HyGrFRC mixes, glass fibers improved the pre-peak behaviour, and steel fibers improved the post-peak behaviour of concrete, thereby exhibiting a positive synergy in combining glass and steel fiber into the concrete. Among the two-hybrid FRC’s, HyGrFRC outperformed HyFRC with substantial improvement in both strength and ductility. Among all the HyGrFRC mixes, HyGr9 mix, which contain a higher amount of long-length fibers exhibited better improvement in peak strain, ductility factor, total energy and toughness index. The replacement of single length of fibers with graded length fibers at higher volume fraction in HyFRC is useful in improving workability, thereby providing better fiber dispersion and thus enhances both the pre-peak and post-peak performance of the concrete. From this investigation, it can be inferred that grading of fibers improved the mechanical behaviour of HyFRC by exhibiting positive synergy from both fiber geometry and fiber type.کلیدواژه ها
Crimped steel fiber, Alkali-resistant glass fiber, high strength concrete, Hybrid Fiber Reinforced High Strength Concrete, Hybrid Graded Fiber Reinforced High Strength Concreteاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.