Mechanical and structural properties of polypropylene/nanoclay composites containing various ratios ofPP-g-MA and SEBS-g-MA
محل انتشار: هفتمین کنفرانس بین المللی شیمی و مهندسی شیمی
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 409
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IRCCE07_083
تاریخ نمایه سازی: 3 شهریور 1399
چکیده مقاله:
Polypropylene/organo-modified montmorillonite (PP/OMMT) nanocomposites containing differentweight ratios of PP-g-MA/SEBS-g-MA (10/0, 7.5/2.5, 5/5, 2.5/7.5, and 0/10) were prepared via meltcompounding using twin screw extrusion followed by injection molding. Mechanical and structuralproperties of the samples were studied using tensile and Izod impact tests, X-ray diffraction (XRD)analysis, and field emission scanning electron microscopy (FESEM). The XRD results indicated that thecharacteristic peak for the nanoclay shifted to lower angles for all the nanocomposites implying thatpolymer chains could intercalate into the nanoclays galleries. Mechanical testing revealed that a goodbalance between stiffness and toughness was achieved for a ratio of 5/5 and FESEM images showed auniform distribution of OMMTs in the matrix for this ratio.
کلیدواژه ها:
نویسندگان
Zohreh Mohammadi
Department of Chemical Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱, Isfahan, Iran
Ehsan Bagheri
Department of Mechanical Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱, Isfahan,Iran
Rouhollah Bagheri
Department of Chemical Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱, Isfahan, Iran
Omid Moini Jazani
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, ۸۱۷۴۶- ۷۳۴۴۱, Isfahan, Iran