Effect of key parameters in rapid expansion supercritical solution process on the structure of drilling mud viscosifiers

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,309

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IOGPC17_022

تاریخ نمایه سازی: 3 آبان 1389

چکیده مقاله:

During well drilling , drill mud is used by the petroleum industry to remove drill cuttings , keep formation fluids confined to their formations , lubricate the drill bit and control reservoir pressure. Attapulgite is used as a viscosifier in saltwater drilling fluids where bentonite becomes ineffective. CMC HV is a high viscosity carboxymethylcellulose which is used as a viscosifier and fluid loss reducing agent in different types of water based drilling fluids. the smaller powders of attapulgite and CMC because of the higher specific surface area need more water to be wet than the coarser one. under the same solid sontent the smaller particles cause the higher viscosity of the slurry. the RESS-process enables the micronization of thermally labile materials and the formation of particles of less than 500 nm in diameter. our current research is aimed towards an improved understanding of the relationship between process parameters and particle characteristics and to explore new areas of application for nanoscale particles. the experiments were carried out to investigate the effect of extraction temperature 308-328K and pressure 14-22MPa , spray distance 1-3cm , nozzle diameter 450-850 mm on the size of the particles. the processed attapulgite and CMC particles could better absorb fluid molecules due to the higher specific surface area as they become nano, and result in better suspension solution which leads to improve the performance of drilling mud.

نویسندگان

iman asghari

M.Sc student of chemical and petroleum engineering department.

feridun esmaeilzadeh

associate professor of chemical and petroleum engineering

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • th Imtl. Oil, Gas _ _ mical Congress چهاردهمین هملیق ...
  • F. Bergaya, B.K.G. Theng and G. Lagaly Handbook of Clay ...
  • H.C.H. Darley George, R. Gray, "Compositions and Properties of Oil ...
  • B.Barrett, E.Bouse, B.Carr, B.DeWolfe, F.Growcock, Drilling Fluids Processing Handbook, Gulf ...
  • Y.PING SUN Supercritical fluid technology materials science and engineering synthesis ...
  • H. Kro ber, U. Teipel, H. Krause, Formation of Submicrom ...
  • P. Debenedetti, J.W. Tom, S.D. Yeo, G.B. Lim, Application of ...
  • K. Mishima, K. Matsuyama, H. Uchiyama, M. Ide, Microcoating of ...
  • K. Mishima, K. Matsuyama, S. Yamauchi, H. Izumi, D. Furudono, ...
  • A.Z. Hezave, F. Esmaeilzadeh, Micronization of drug particles via RESS ...
  • J.D Wang, J.Z. Chen, Y.R. Yang, J. Supercrit. Fluids 33 ...
  • _ _ _ of ultrafine _ _ ...
  • J. Wang, J. Chen, Y. Yang, Micronization of titanocene dicholoride ...
  • Helfgen, B. ; Hils, P. ; Holzknecht, C. ; Turk, ...
  • نمایش کامل مراجع