Dual Identification System for Evaluating the Aerodynamics Coefficients of Flying Robots
- سال انتشار: 1399
- محل انتشار: بیست و هشتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME28_518
- زبان مقاله: انگلیسی
- تعداد مشاهده: 423
نویسندگان
Masters Student, Amirkabir University of Technology, Tehran, Iran,
Undergraduate Student, Amirkabir University of Technology, Tehran, Iran,
Assistance Professor, Amirkabir University of Technology, Tehran, Iran,
Professor, Amirkabir University of Technology, Tehran, Iran,
Assistance Professor, Amirkabir University of Technology, Tehran, Iran,
چکیده
One of most important requirements in aerial robots modeling concerns the identification of the aerodynamics parameters. Among these parameters, researchers devote more attention to the values of lift force and drag toque coefficients. Several papers have reported the methods to separately evaluate the lift and drag coefficients. A novel setup is introduced to perform the related tests for both coefficients and reduces the necessary effort to identify a dynamic model. After a general introduction on the modularity of the system, this paper indicates that by a simple pivoting and some minor modifications, the measuring procedure would be feasible. For this purpose, after expressing the theoretical equations of lift force and drag torque, the system concept is demonstrated and a first assembly is proposed using Tetrix® components. An ultimate design is proposed to resolve the experimental system and by numerical simulation, the natural frequencies are located outside the excitation range. An experimental identification is performed for a common set of motor and propeller with available data. The achieved results proved well the efficiency of the proposed system to evaluate the lift force and drag coefficients.کلیدواژه ها
Identification, Aerodynamics coefficients, Flying robots, Lift force, Drag torque.مقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.