Synthesis of particulate in situ Aluminium-Alumina composite by using aluminothermic reactions
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_157
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1800
نویسندگان
Graduate student
Associate professor
Assistant professor, Department of Materials Engineering
Graduate student
چکیده
Particle reinforced metal matrix composites (MMCs) are an important class of composite materials. During last decades, particulate metal matrix composites have found special industrial applications in producing wear-resistance components. One of the best ways for producing cast particulate composites is In-Situ methods. The advantage is considered to be of higher compatibility and improved particle matrix interfaces. A commonly adopted in situ method involves reaction between a metal oxide and aluminium to produce alumina particles or whisker reinforcements. By completing the alumina formation reaction, the reduced metal usually further reacts with Al to form intermetallic phases, which also act as reinforcements in the matrix of the composite. Because of the formation of ultrafine and stable ceramic reinforcements, the in situ MMCs are found to exhibit excellent mechanical properties. In this study, In-situ particlereinforced aluminium based cast composites have been synthesized by dispersion of externally added Zinc Oxide particles into molten aluminium at different processing temperatures. Alumina particles (Al2O3) form through chemical reaction of ZnO particles with molten aluminium. Simultaneously, the chemical reaction also releases Zinc, which dissolves into molten aluminium during solidification. X-ray diffraction and scanning electron microscopy have been used to study the various reaction mechanisms and transformations.کلیدواژه ها
metal matrix composites; particulate; in-situ; zinc oxide; alumina particleمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.