Feasibility study of porous Fe-Al2O3 composite fabrication through combination of SPS and SHS processes
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_123
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2270
نویسندگان
Assistant Professor, Department of metallurgical and materials engineering, Ferdowsi university of Mashhad
graduate student, Department of metallurgical and materials engineering, Ferdowsi university of Mashhad
under graduate student, Department of metallurgical and materials engineering, Ferdowsi university of Mashhad
Professor, Department of metallurgical and materials engineering, Ferdowsi university of Mashhad
چکیده
In this study, fabrication of Fe-Al2O3 porous composite through combination of two non conventional material processing techniques of spark plasma sintering (SPS) and self propagating high-temperature synthesis (SHS) was investigated. Mixtures of Fe, Al and Fe2O3 powders, containing different amounts of each, were used as starting materials. Applying pulsed electric current to the powder was caused to the formation of Al2O3 and releasing of heat by reaction of Al and Fe2O3 according to: 2Al + Fe2O3 = Al2O3 + 2Fe. In addition, pulsed current flow through the powder heated up it by joule effect and supplied required energy for sintering. Fabrication of composite foam in time duration shorter than 5 minutes is the main feature of this process. It was found that increasing of Fe2O3 and Al contents in the primary mixture would result in an increase of Al2O3 and porosity at a constant sintering time.کلیدواژه ها
spark plasma sintering (SPS); self propagating high-temperature synthesis (SHS);metallic matrix composite; metallic foam; aluminaمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.