Synthesis, characterization and electrochemical testing of zirconia-10 mol% alumina nanocomposite thin films on the 316L stainless steel substrate via a sol-gel process
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_056
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1492
نویسندگان
Master Student
Assistant Professor
Professor, Department of Materials and Metallurgical Engineering
Master Student, Department of Material Engineering, Sahand University of Technology, Tabriz
چکیده
In this paper, zirconia -10 mol% alumina nanocomposite thin films produced by a sol-gel dip coating technique on the 316L stainless steel substrates were investigated at different temperatures. The results showed that this route led to the formation of a surface tetragonal zirconia (t-ZrO2) + corundum (α- Al2O3) phase free of cracks thin film with high crystallinity at 900 ºC. Electrochemical tests were carried out in NaCl 3.5% solution in heat treated samples. The experiments also showed most enhanced corrosion prevention in the samples due to these thin films at (600-700) ºC. Microstructures and phase changes of the synthesized thin films were characterized by thermogravimetric/ differential thermal analysis (TG/DTA), Fourier transform-infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). AFM and SEM images showed that a uniform and free of cracks film on the surface is obtained in this process. Moreover, microstructural characterization by AFM analyses indicated that the average roughness at first decreases with increasing the temperature until 700 ºC and then increases. The SEM micrographs depicted that the morphology of the synthesized zirconia-10 mol% alumina nanocomposite thin films have changed according to the heat treatment history.کلیدواژه ها
Zirconia-10 mol% alumina, nanocomposite thin films, sol-gel, heat treatment, 316Lstainless steelمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.