Investigation on Microstructure of Transient Liquid Phase Diffusion Bonded Joints of Al/Mg2Si Metal Matrix Composite
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_038
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1971
نویسندگان
Graduate student
Associate Professor, Department of Metallurgy and materials Engineering
Graduate student
چکیده
The growing demand for more fuel-efficient vehicles to reduce energy consumption and air pollution is a challenge for the automotive industry. Recently, Al-Mg2Si metal matrix composites (MMCs) have been developed for high-performance applications in automotive industries. Al- and Mg-based composites, reinforced with particulates of Mg2Si have been recently introduced as a new group of particulate metal matrix composites that are good candidates to replace Al–Si alloys used in aerospace and engine applications. Suitable joining technologies will be required if the materials are to be used as structural components. As-cast Al/Mg2Si metal matrix composite was joined by transient liquid phase diffusion bonding using Cu interlayer at various bonding temperatures and durations. This metal matrix composite containing 15 wt% Mg2Si was produced through in situ technique by gravity casting. Specific diffusion bonding process was applied as a low vacuum technique. The microstructure of joints was examined by scanning electron microscope equipped with energy dispersive X-ray spectroscopy and optical microscope. The microstructure of joints consisted of Al-α, CuAl2 and Mg2Si or Al-α and Mg2Si depending on bonding temperature and duration. Also, bonding temperature and duration affected aggregation zone of Mg2Si particles at bonded interface.کلیدواژه ها
Al/Mg2Si metal matrix composite; Transient liquid phase diffusion bonding;Microstructure; Cu interlayerمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.