2D and 3D Interlaminar Fracture Evaluation of Unidirectional Carbon/Epoxy Arcan Specimens
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_032
- زبان مقاله: انگلیسی
- تعداد مشاهده: 3698
نویسندگان
Department of Mechanical Engineering, Sahand University of Technology
Department of Mechanical Engineering, Sahand University of Technology
Department of Mechanical Engineering, Islamic Azad University, Karaj branch, Iran
Department of Mechanical Engineering, Islamic Azad University, Karaj branch, Iran.
چکیده
This paper investigates mixed-mode interlaminar fracture behavior in UD carbon/epoxy composite material based on numerical and experimental analyses. A modified version of Arcan specimen was employed to conduct a mixed-mode fracture test using a special loading device. A full range of mixedmode loading conditions including pure mode-I and pure mode-II loading were created and tested. Using the two-dimensional finite-element results, correction factors were applied to the UD carbon/epoxy fracture specimens. Moreover, the correction factors were determined via two- and threedimensional analysis and the results were compared. By employing experimentally measured critical loads and the aid of the finite-element method, mixed-mode interlaminar fracture toughness for the composite under consideration determined. Results indicated that the interlaminar cracked specimen is tougher in shear loading condition and weaker in tensile loading condition.کلیدواژه ها
Delamination; Finite Element Analysis; Fracture toughnessمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.