Structural and mechanical properties of epoxy resin/jeffamine-D400 reinforced by multiwall carbon nanotubes
- سال انتشار: 1389
- محل انتشار: دومین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT02_019
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2160
نویسندگان
Ph.D. student
Professor, Department of Mechanical Engineering, Tarbiat Modares University
Ph.D. student
چکیده
Polymer nanocomposites reinforced with carbon nanotubes have been attracted by many researchers. The properties of nanocomposites depend greatly on the chemistry of polymer matrices, nature of nanofillers and the way in which they are prepared. Properties of epoxy resin have a significant influence on the mechanical properties of the nanocomposites. In this paper the effect of matrix hardness on the mechanical properties of the carbon nanotubes reinforced epoxy composite has been studied and an experimental investigation of the effect of nanotubes on the mechanical properties of the composites was reported. In this study, epon-828 and jeffamine-D400 were used. Multiwall carbon nanotubes/epoxy resin composites have been fabricated and the mechanical properties of the composite with different weight percentages of nanotubes have been obtained. A sonication technique was used to disperse nanotubes in epoxy matrix. Particular attention is paid on the structure property relationship of such novel high performance polymer nanocomposites when the matrix is reinforced with E-glass. The results have shown that ultimate stress and strain for different percentage of nanotubes is increasedکلیدواژه ها
multiwall carbon nanotubes, mechanical properties, polymer matrix, nanocompositeمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.