Improve in the mechanical properties of dissimilar FSW by considering different cross section design in joint line
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 509
فایل این مقاله در 7 صفحه با فرمت PDF و WORD قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
EISTC03_015
تاریخ نمایه سازی: 12 خرداد 1399
چکیده مقاله:
Friction stir welding (FSW) process is a relatively new welding technique where friction heat is used to forge metal components together. Due to the absence of parent metal melting, the FSW process observed to offer several advantages over fusion welding. AA6XXX and 7XXX Al alloys are two series of the most widely used structural materials in automotive, rail transportation and aerospace industries. The objective of this study was to investigate the effect of new cross section in joint line and analyze in detail for furtherimprove on mechanical properties. Joints fabricated using this approach led to better results in terms of joint strength and quality. The fabricated joints exhibitvery good tensile properties with ultimate tensile strength (UTS) higher than 254 MPa and elongation higher than 7%.
کلیدواژه ها:
نویسندگان
Mehran Tamjidi
Department of Industrial Engineering, Velayat University, Iranshahr, Iran