Multi-Objective Optimization of the Stamping of Titanium Bipolar Plates for Fuel Cell

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 272

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-12-4_001

تاریخ نمایه سازی: 27 فروردین 1399

چکیده مقاله:

High demands of quality development in the industry especially automotive, necessitates multi-objective optimization of the manufacturing processes. Fuel cells are one of the most important sources of renewable energies that Bipolar Plates (BPPs) are their main components. Metallic BPPs are known as a suitable replacement of the graphite plates due to their lower weight and cost. Accordingly, this study employs Multi-Criteria Decision Making (MCDM) methods to determine the best forming condition in the stamping of titanium BPP. In the first step, the process is analyzed using the Finite Element (FE) simulation. Afterward, validation of the FE model is confirmed by performing the experiments using titanium ultra-thin sheet with a thickness of 0.1 mm. Subsequently, a set of tests with 15 experiments are assumed to be as alternatives. In addition, filling ratio, thinning ratio and forming load are considered as different criteria. In order to select the optimum condition considering three mentioned responses simultaneously, TOPSIS and VIKOR methods are applied. In addition, a weighting procedure combining AHP and Entropy approaches is used. Based on the weighting results, the highest and lowest weights were obtained for filling ratio (0.5398) and forming load (0.1632), respectively. Likewise, a Spearman’s rank equal to 0.9357 was obtained that demonstrates high compatibility between TOPSIS and VIKOR methods. Overall, the best (optimum) forming condition has obtained an experiment with a clearance of 0.2 mm, the speed of 3.5 mm/s, and friction coefficient as 0.2.

کلیدواژه ها:

نویسندگان

Vahid Modanloo

Department of Mechanical Engineering, Urmia University, Iran

Vali Alimirzaloo

Department of Mechanical Engineering, Urmia University, Iran

Majid Elyasi

Department of Mechanical Engineering, Babol Noshirvani University of Technology, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Taherian, R., A Review of Composite and Metallic Bipolar Plates ...
  • Kolahdooz, R., Asghari, S., Rashid-Nadimi, S., and Amirfazli, A., Integration ...
  • Belali-Owsia, M., Bakhshi-Jooybari, M., Hosseinipour, S. J., and Gorji, A. ...
  • Bong, H. J., Lee, J., Kim, J. H., Barlat, F., ...
  • Peng, L., Yi, P., and Lai, X., Design and Manufacturing ...
  • Ozturk, F., Ece, R. E., Polat, N., Koksal, A., Evis, ...
  • Badr, O. M., Rolfe, B., Hodgson, P., and Weiss, M., ...
  • Maati, A., Tabourot, L., Balland, P., Ouakdi, E. H., Vautrot, ...
  • Dur, E., Cora, Ö. N., and Koç, M., Effect of ...
  • Koo, J. Y., Jeon, Y. P., and Kang, C. G., ...
  • Jin, C. K., Koo, J. Y., and Kang, C. G., ...
  • Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method [مقاله ژورنالی]
  • Moradi, M., Golchin, E., Investigation on the Effects of Process ...
  • Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [مقاله ژورنالی]
  • Moradi, M., KaramiMoghadam, M., High Power Diode Laser Surface Hardening ...
  • Vahdati, M., Mahdavinejad, R. A., Amini, S., and Moradi, M., ...
  • Patel, J. D., Maniya, K. D., Application of AHP/MOORA Method ...
  • Bhattacharjee, P., Debnath, A., Chakraborty, S., and Mandal, U. K., ...
  • Mousavi-Nasab, S. H., Sotoudeh-Anvari, A., A Comprehensive MCDM-based approach using ...
  • Yazdani, M., Payam, A. F., A Comparative Study on Material ...
  • Govindan, K., Shankar, K. M., and Kannan, D., Sustainable Material ...
  • Elyasi, M., Khatir, F. A., and Hosseinzadeh, M., Manufacturing Metallic ...
  • Chu, J., Su, Y., The Application of TOPSIS Method in ...
  • Singh, T., Patnaik, A., Chauhan, R., and Chauhan, P., Selection ...
  • Moradian, M., Modanloo, V., and Aghaiee, S., Comparative Analysis of ...
  • Biswas, P., Pramanik, S., and Giri, B. C., TOPSIS Method ...
  • Çalışkan, H., Kurşuncu, B., Kurbanoğlu, C., and Güven, Ş. Y., ...
  • Chatterjee, P., Athawale, V. M., and Chakraborty, S., Selection of ...
  • نمایش کامل مراجع