EFFECT OF DIFFERENT WATER INJECTION RATE ON RESERVOIR PERFORMANCE:A CASE STUDY OF AZADEGAN FRACTURED OIL RESERVOIR
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,616
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICOGPP01_328
تاریخ نمایه سازی: 22 مرداد 1391
چکیده مقاله:
A naturally fractured reservoir may be divided vertically into several zones, i.e. gas cap, gas invaded, undersaturated oil, water invaded, andaquifer. Gravity drainage is the main oil producing mechanism in gas invaded zone. Depending on the wettability of the reservoir rock, the main recoverymechanism in water invaded zone will be gravity drainage or imbibition for oil wet or water wet rock, respectively. When production from a reservoir starts after awhile, the production will decrease because of reservoir depletion. To enhance the final recovery there are some scenarios, one of them is waterinjection. Water injection has been the most used recovery method in petroleum industries due to its advantages. The injected water displaces oil fromporous media to producing wells and maintains the reservoir pressure above of saturation pressure, increasing the recovery process efficiently. One ofimportant variable is injection rate that influence the water injection performance, therefore by simulating the reservoir with different injection rate we could obtain the proper one for reservoir development. The goal of this work is to study the impact ofwater injection rate on the reservoir performance andsimulate the water injection performance in reservoir scale. This work is a case study on Azadegan oil reservoir. This work is done on investigation of water injection in sector A of Azadegan oil reservoir that it has a dual porosity manner. Water injection simulations wereperformed at different rates. Before any injections the plateau time is about 5000 days. After putting the injection wells and applies the rates it is observed that the plateau time is increased. Higher water injection rates results in higher oil production sowater injection is suitable for this dual porosity case. Because water moves through fractures quickly and so capillary imbibition process can help push the oil to producing well.
نویسندگان
Mehdi Safari
Petroleum University of Technology, Ahwaz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :